YASKAWA A1000 Series Quick Start Manual page 125

10. Press
to confirm the change.
11. The display automatically returns to the screen shown in Step 4.
12. Press
as many times as necessary to return to the initial display.
n Setup Group Parameters
Table 4.4 lists the parameters available by default in the Setup Group. Selecting an Application Preset in parameter A1-06 or
from the Application Selection Menu of the Setup Group automatically changes the parameters selected for the Setup Group.
Refer to Application Selection on page 134
Use the Programming Mode to access parameters not displayed in the Setup Group.
Parameter
A1-02 Control Method Selection
b1-01 Frequency Reference Selection 1
b1-02 Run Command Selection 1
b1-03 Stopping Method Selection
C1-01 Acceleration Time 1
C1-02 Deceleration Time 1
C6-01 Drive Duty Mode
C6-02 Carrier Frequency Selection
d1-01 Frequency Reference 1
d1-02 Frequency Reference 2
d1-03 Frequency Reference 3
d1-04 Frequency Reference 4
d1-17 Jog Frequency Reference
Note: 1. Parameter availability depends on the control mode set in A1-02; some parameters listed above may not be accessible in all control
modes.
2. Parameters listed in
YASKAWA ELECTRIC TOEP C710616 41G YASKAWA AC Drive - A1000 Quick Start Guide
Step
for more information.
Table 4.4 Setup Group Parameters
Name
Table 4.4 are set in alphanumeric order as User Parameters in A2-01 to A2-26.
4.2 The Drive and Programming Modes
Parameter
E1-01 Input Voltage Setting
E1-03 V/f Pattern Selection
E1-04 Maximum Output Frequency
E1-05 Maximum Voltage
E1-06 Base Frequency
E1-09 Minimum Output Frequency
E1-13 Base Voltage
E2-01 Motor Rated Current
E2-04 Number of Motor Poles
E2-11 Motor Rated Power
H4-02 Multi-Function Analog Output Terminal FM Gain
L1-01 Motor Overload Protection Function Selection
L3-04 Stall Prevention Selection during Deceleration
Display/Result
Entry Accepted
-PRMSET- PRG
Decel Time 1
C1-02= 20.0Sec
(0.0~6000.0)
"10.0 sec"
← →
FWD
- MODE - DRV Rdy
FREF (OPR)
U1-01= 0.00Hz
U1-02= 0.00Hz LSEQ
U1-03= 0.00A LREF
JOG FWD FWD/REV
Name
125
4