Combination Switch - Honda CB HORNET 160R 2015 Shop Manual

LIGHTS/METERS/SWITCHES
6. To set the minute, press the reset button until the desired
minute appears.
– Quick setting - press and hold the reset button until
the desired minute appears.
7. Press the select button when the display reaches the
desired minute.
The display will stop flashing.
If the combination switch is turned off or no operation is
performed for 30 seconds during the time adjustment mode,
the clock will be reset.
The clock will be reset at 1:00 hrs if the battery is
disconnected.

COMBINATION SWITCH

INSPECTION
Remove the front cowl (page 2-2).
Disconnect the combination switch 3P White connectors.
Check for continuity between the combination switch
connector terminal in each switch position according to
the table.
LOCK
OFF
ON
COLOR
REMOVAL/INSTALLATION
Remove the combination meter (page 17-6).
Remove the top bridge (page 12-21).
Remove the following:
– combination switch mounting screws
– combination switch
Apply a locking agent to the combination switch mounting
screws threads before installing.
Install the following:
– combination switch
– combination switch mounting screws.
Install the top bridge (page 12-26).
Install the combination meter (page 17-6) in reverse order.
Install the front cowl (page 2-2).
17-10
BAT1 BAT2
R/B
R
IGNITION SWITCH
3P CONNECTORS
SCREWS
IGNITION
SWITCH
SCREWS
IGNITION
SWITCH