Rear Wheel; Disc Type; Drum Type - Honda CB HORNET 160R 2015 Shop Manual

REAR WHEEL/SUSPENSION

REAR WHEEL

DISC TYPE

REMOVAL
Support the motorcycle on its center stand.
Loosen the lock nut, drive chain adjusting nut,and rear
axle nut.
Push the real wheel forward and derail the drive chain from
driven sprocket
Remove the rear axle nut, rear axle and adjusting plates.
Remove the rear wheel.
• Do not hang the caliper by the brake hose.
• Do not twist the brake hose.
• Do not operate the brake pedal after removing the
rear wheel.
DISASSEMBLY
Inspect the brake disc before disassembly (page 13-5)
Remove driven flange (page 13-9)
Remove the brake disc mounting bolts, collar and brake
disc.
Remove the dust seal.

DRUM TYPE

REMOVAL
Remove the rear brake adjusting nut
Push the brake pedal down and remove the brake rod
from the joint piece.
DISASSEMBLY
Remove driven flange (page 13-9)
Remove the brake panel assembly from the right side of
wheel hub.
13-4
LOCK NUT
AXLE SHAFT
BOLTS
DUST SEAL
SIDE COLLAR
RIGHT ADJUSTING PLATE
ADJUSTING NUT
ROD SPRING
JOINT PIECE
BRAKE PANEL
AXLE NUT
RIGHT ADJUSTING
PLATE
BRAKE DISC
AXLE NUT