Turn Signal Lights; Bulbs Replacement - Honda CB HORNET 160R 2015 Shop Manual

LIGHTS/METERS/SWITCHES

TURN SIGNAL LIGHTS

BULB REPLACEMENT
Remove the screw and remove signal light lens.
Push the bulb in turn it counterclockwise and remove it.
Replace the bulb with a new one.
Installation is in the reverse order of removal.
REMOVAL/INSTALLATION
FRONT
Remove the front cowl (page 2-2).
Disconnect the turn signal light connector.
Route the wires
Remove the turn signal mounting nut and stay.
properly
Remove the turn signal light assy.
(page 1-14).
Install the turn signal light by aligning the cut-out of the turn
signal light with cut-out washer.
Installation is in the reverse order of removal.
REAR
Remove the rear cowl set (page 2-7).
Disconnect the turn signal light connectors.
Remove the nuts (2 nos) and remove signal lights.
Install the turn signal light by aligning the cut-out of the turn
Route the wires
signal light with cut-out washer.
properly
(page 1-14).
Installation is in the reverse order of removal.
17-4
BULB
SCREW
NUT
CONNECTOR
NUT
CONNECTOR
TURN SIGNAL LIGHT
NUTS
CUTOUT WASHER
LENS
STAY
STAY
Align