Honda CB HORNET 160R 2015 Shop Manual page 95

INSTALLATION
Install a new O-ring onto the fuel strainer, and install the
fuel strainer into the fuel valve.
Install the fuel strainer and fuel valve assembly into the
fuel tank.
Tighten the fuel valve lock nut and apply the specified
Torque.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
Install the fuel tank (page 2-4).
Install the fuel valve knob while aligning the fuel valve tab
with the know hole.
Install and tighten the screw.
Install the left side cover (page 2-3).
FUEL STRAINER
O-RING
LOCK NUT
FUEL VALVE KNOB
Align
FUEL KNOB
FUEL SYSTEM
FUEL VALVE
FUEL VALVE
SCREWS
5-23