Pull the fork pipe up and install the fork spring with the
tightly wound coil side facing down.
Install the spring seat and spring collar.
Apply fork fluid to a new O-ring and install it onto the fork
Tighten the
fork bolt after
bolt.
installing the
Loosely install the fork bolt by pushing it to the fork pipe.
fork pipe into the
fork bridges.
INSTALLATION
Route the wires
Install the fork leg through the bottom bridge and top bridge
and cables
while aligning index line of fork pipe with the top surface
properly
of top bridge.
(page 1-15).
FRONT WHEEL/SUSPENSION/STEERING
FORK SPRING
DOWN
SPRING COLLAR
SPRING SEAT
FORK BOLT
O-RING
Align
FORK PIPE
FORK PIPE
FORK SOCKET BOLT
12-21