Engine Oil Change - Honda CB HORNET 160R 2015 Shop Manual

MAINTENANCE
Apply clean engine oil to a new O-ring, and install it on oil
filler cap / dipstick.
Reinstall and tighten the oil filler cap/dipstick securely.
O-RINGS
DIPSTICK

ENGINE OIL CHANGE

Change the oil
Warm up the engine to normal operating temperature.
with the engine
Stop the engine, and remove the oil filler cap/dipstick.
warm and the
motorcycle
placed on its
center stand to
assure complete
and rapid
draining.
OIL FILLER CAP/DIPSTICK
Place a clean container under the engine.
Remove the oil drain bolt and sealing washer.
Drain the engine oil completely.
Install the oil drain bolt with a new sealing washer, and
tighten it to the specified torque.
TORQUE: 30 N·m (3.0 kgf·m, 22 lbf·ft)
SEALING WASHER
BOLT
Fill the crankcase with the recommended engine oil
(page 3-10).
ENGINE OIL CAPACITY:
1.0 liters (1.0 US qt, 0.9 Imp qt) at draining
1.2 liters (1.3 US qt, 1.1 Imp qt) at disassembly
Check the engine oil level (page 3-10).
Start the vehicle and check for no oil leaks.
FILLER CAP/DIPSTICK
3-11