Clutch Lifter Bearing; Clutch Spring; Clutch Center; Friction Disc - Honda CB HORNET 160R 2015 Shop Manual

CLUTCH/GEARSHIFT LINKAGE
INSPECTION

CLUTCH LIFTER BEARING

Turn the inner race of the clutch lifter bearing with your
finger.
The bearing should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in the
clutch lifter plate.
Replace the bearing if the inner race does not turn
smoothly, quietly, or if the outer race fits loosely in the
clutch lifter plate.
Replace the

CLUTCH SPRING

clutch springs
Check the clutch spring for fatigue or damage.
as a set.
Measure the clutch spring free length.
SERVICE LIMIT:

CLUTCH CENTER

Check the grooves of the clutch center for damage or wear
caused by the clutch plates.

FRICTION DISC

Check the friction discs for signs of scoring or discolouration.
9-8
37.5 mm (1.47 in)
LIFTER PLATE BEARING
GROOVE
DISC A DISC B
A>B
CLUTCH OUTER