Kickstarter - Honda CB HORNET 160R 2015 Shop Manual

KICKSTARTER

REMOVAL
Remove the right hand side crankcase (page 11-4).
Remove the snap ring and spindle retainer.
Pullout the kickstarter assembly to unhook the return spring
from the crankcase.
DISASSEMBLY
Remove the following:
– Lock washer
– Collar Ratchet
– Return spring
– Snap ring
– Ratchet
Remove the following:
– Snap ring
– Washer
– Drive gear
– Spindle
INSPECTION
Check the following:
– Starter ratchet and kickstarter drive gear for excessive
wear or damage
– Spindle for vent or damage
Measure the kickstarter drive gear I.D. and spindle O.D.
at the kickstarter drive gear.
SERVICE LIMITS:
Drive gear I.D.: 16.06 mm (0.632 in)
Spindle O.D.: 15.94 mm (0.628in)
CRANKCASE/TRANSMISSION/KICKSTARTER
SNAP RING
LOCK WASHER
COLLAR
SNAP
RING
SNAP RING
RATCHET
DRIVE
GEAR
DRIVE
GEAR
KICK STOPPER
RETURN SPRING
RETAINER SPRING
SNAP SPRING
SNAP RING
WASHER
SPINDLE
11-21