Engine Oil; Oil Level Inspection; Recommended Engine Oil - Honda CB HORNET 160R 2015 Shop Manual

MAINTENANCE
Install and tighten the crankshaft hole cap to the specified
torque.
TORQUE: 15 N·m (1.5 kgf·m, 11 lbf·ft)
Install and tighten the timing hole cap to the specified
torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)

ENGINE OIL

OIL LEVEL INSPECTION

Support the motorcycle on its center stand.
While checking
oil level take into
Start the engine and let it idle for 3 – 5 minutes.
consideration
Stop the engine and wait 2 – 3 minutes.
not to screw
dipstick.
Remove the oil filler cap / dipstick, and wipe the oil from
the dipstick with a clean shop towel.
Reinstall the oil filler cap / dipstick, but do not screw it.
Remove the oil filler cap / dipstick.
Check the oil level.
If the oil level is below or near the lower level line on the
dipstick, fill the recommended engine oil to the upper level
line through the oil filler hole.

RECOMMENDED ENGINE OIL:

Honda 4 – Stroke oil or equivalent motor oil
API service classification: MA
Viscosity: SAE 10W–30
3-10
TIMING HOLE CAP
CRANKSHAFT HOLE CAP
OIL FILLER CAP/DIPSTICK
UPPER
LOWER