Crankcase Breather; Spark Plug - Honda CB HORNET 160R 2015 Shop Manual

CRANKCASE BREATHER

Service more frequently when ridden in rain, at full throttle,
or after the motorcycle is washed or overturned.
Check the crankcase breather hose for deterioration,
damage or loose connection. Make sure that the hoses
are not kinked, pinched or cracked.
Loosen the drain hose clip and remove the drain hose
from the air cleaner housing and drain deposits into a
suitable container.
Reinstall the drain hose.

SPARK PLUG

REMOVAL
Disconnect the spark plug cap.
Clean around
the spark plug
base with
compressed air
before removing
the spark plug
cap, and make
sure no debris is
allowed to enter
the combustion
chamber.
Remove the spark plug using a equipped spark plug wrench
or an equivalent.
Inspect or replace the spark plug as described in the
maintenance schedule (page 3-3).
Replace it if necessary.
RECOMMENDED SPARK PLUG:
Standard: CPR8EA–9 (NGK)
BREATHER HOSE
DRAIN HOSE CLIP
DRAIN HOSE
SPARK PLUG CAP
SPARK PLUG
MAINTENANCE
3-7