Honda CB HORNET 160R 2015 Shop Manual page 215

Do not open Install the slider bushing being careful not to damage the
the bushing coating of the bushing, if it has been removed.
slit more than
Remove the burrs from the bushing mating surface, being
necessary.
careful not to peel off the coating.
Apply fork fluid to a new oil seal lips.
Install the oil
seal with its
Install the guide bushing, back-up ring and oil seal onto
marked side
the fork tube.
facing up.
Install the rebound spring to the fork piston and install them
into the fork pipe.
Install the oil lock piece onto the fork piston end.
Install the fork pipe into the fork slider.
Do not over- Set the fork slider in a vise with a piece of wood or soft
tighten the vise jaws to avoid damage.
on the piston
Install a new sealing washer to the fork socket bolt.
remover front
cushion. Apply locking agent to the fork socket bolt threads and
install it.
FRONT WHEEL/SUSPENSION/STEERING
GUIDE
BUSHING
REBOUND
SPRING
FORK PIPE
FORK PIPE
FORK PISTON
OIL LOCK PIECE
FORK SLIDER
FORK SOCKET BOLT
OIL SEAL
BACK-UP RING
FORK PISTON
FORK SLIDER
SEALING WASHER
12-19