Table of Contents
Advertisement
REAR WHEEL/SUSPENSION
Remove the driven sprocket nuts and driven sprocket.
Check the condition of the driven sprocket teeth.
Replace the sprocket if it is worn or damaged.
•
If the driven sprocket requires replacement inspect the
drive chain and drive sprocket.
•
Never install a new drive chain on a worn sprocket or a
worn chain on new sprockets. Both chain and sprocket
must be in good condition, or the replacement chain or
sprocket will wear rapidly.
Drive out the driven flange bearing.
DRIVEN FLANGE BEARING
Turn the inner race of bearing with your finger.
The bearing should turn smoothly and quietly. Also check
that the bearing outer race fits tightly in the driven flange.
Remove and discard the bearing if they do not turn
smoothly, quietly, or if they fit loosely in the driven flange.
13-10
DRIVEN
SPROCKET
NUTS
BEARING
DRIVEN FLANGE
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
