Honda CB HORNET 160R 2015 Shop Manual page 100

ENGINE REMOVAL/INSTALLATION
The jack Support the engine using a jack or other adjustable support
height must to ease of engine hanger bolts removal.
be continually
Remove the following:
adjusted to
– Front engine hanger bolts and nuts
relieve stress
for ease of bolt – Plate bolts and nuts
removal.
– Front engine hanger plate
Remove the rear engine hanger bolts and nuts first lower
During engine
removal, hold then upper.
the engine
Remove the engine from the frame.
securely not
to damage
the frame and
engine. use
masking tape on
frame to save
from scratches.
ENGINE INSTALLATION
• Place the jack or other adjustable support under the
engine.
• The jack height must be continually adjusted to relieve
stress for ease bolt installation.
• Carefully align the mounting points with the jack to
prevent damage to engine, frame, wires and cables.
• All the engine mounting bolts and nuts loosely install,
then tighten the bolts and nuts to the specified torque.
• Route the wires and cables properly.
During engine Place the engine in the frame.
installation,hold
Install the rear engine hanger bolts and nuts, but do not
the engine
tighten it yet.
securely and
be careful not
to damage
the frame and
engine.
6-4
FRONT ENGINE
HANGER BOLTS/NUTS
BOLTS/ NUTS
PLATE
BOLTS/NUTS
BOLTS/NUTS