Honda CB HORNET 160R 2015 Shop Manual page 242

REAR WHEEL/SUSPENSION
Install the shock absorber lower mounting bolt and nut.
Tighten the nut to the specified Torque.
TORQUE: 44 N.m (4.5 kgf.m, 33 Ibf.ft)
Install the rear brake caliper hose and tighten the
bolts (2 nos.).
Install the drive chain upper and lower case and tighten
the bolts (4 nos.).
Install the rear wheel (page 13-8).
13-18
NUT
REAR BRAKE
HOSE
DRIVE CHAIN
UPPER CASE
DRIVE CHAIN
LOWER CASE
AXLE NUT
AXLE SHAFT
SHOCK ABSORBER
BOLT
BOLTS
BOLTS
BRAKE CALIPER
RIGHT ADJUSTING
PLATE