Honda CB HORNET 160R 2015 Shop Manual page 222

FRONT WHEEL/SUSPENSION/STEERING
Install the adjusting nut and tighten it to the specified torque.
TOOL:
Socket wrench steering 070SRTKSP004
TORQUE: 24 N.m (2.4 kgf.m, 17.7 Ibf.ft)
Turn the steering stem left and right several times.
Refer to torque Temporarily loosen the adjusting nut completely, then
retighten the adjusting nut to the specified torque.
wrench reading
information
TOOL:
on page
12-1 'Service Socket wrench steering 070SRTKSP004
information'.
TORQUE:
Actual 2.5 N.m (0.25 kgf.m, 1.8 Ibf.ft)
Check that there is no vertical play and that the steering
stem rotates smoothly.
Install the top bridge.
Install the washer and steering stem nut.
12-26
ADJUSTING NUT
ADJUSTING NUT
TOP BRIDGE
WASHER
STEERING STEM NUT
SOCKET WRENCH
STEERING
SOCKET WRENCH
STEERING