Remove the steering stem nut, washer and top bridge.
Loosen the adjusting nut using the special tool.
TOOL:
Socket wrench steering
Hold the steering stem and remove the adjusting nut.
Be careful not to
Remove the following top cone race
loose the steel
balls.
Remove the following:
– Upper steel ball (18)
– Lower steel ball (18)
– Bottom bridge
FRONT WHEEL/SUSPENSION/STEERING
070SRTKSP004
STEERING STEM
SOCKET WRENCH
STEERING
NUT
TOP CONE
RACE
LOWER STEEL
BALL (18)
STEERING
STEM NUT
WASHER
UPPER STEEL
BALL (18)
BOTTOM
BRIDGE
12-23