Axle; Wheel Bearing - Honda CB HORNET 160R 2015 Shop Manual

FRONT WHEEL/SUSPENSION/STEERING
Do not operate Loosen the front axle pinch bolt.
the front brake
Remove the front axle and front wheel.
lever after the
front wheel is
removed.
Remove the side collar from both side of front wheel.
INSPECTION

AXLE

Place the axle on V-blocks. Turn the axle and measure the
runout using a dial indicator.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 0.2mm (0.01 in)

WHEEL BEARING

Turn the inner race of each bearing with your finger.
Also check that the bearing outer race fits tightly in the hub.
Remove and discard the bearings if the inner races do
not turn smoothly, quietly, or if they fit loosely in the hub.
12-10
FRONT AXLE
PINCH BOLT
SIDE COLLAR
FRONT AXLE