Fork - Honda CB HORNET 160R 2015 Shop Manual

FRONT WHEEL/SUSPENSION/STEERING
Tighten the front axle pinch bolt to the specified torque.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
Check the brake operation.

FORK

REMOVAL
Remove the following:
– Front wheel (page 12-9)
– Front fender (page 2-5)
Do not suspend
Remove the brake caliper mounting bolts and brake caliper/
the brake
bracket assembly.
caliper/ bracket
assembly from
the brake hose.
Do not twist the
brake hose.
When the fork is ready to be disassembled, loosen the
fork socket bolts.
Hold the fork legs and loosen the bottom bridge pinch bolts
and lower the fork legs, then remove it.
12-14
FRONT AXLE
PINCH BOLT
FORK SOCKET BOLT
BOTTOM BRIDGE BOLTS
FRONT
FENDOR
BOLTS