Honda CB HORNET 160R 2015 Shop Manual page 171

Apply liquid sealant to the wire grommet seating surface,
and install the wire grommet into the groove.
Install the wire guide and ignition pulse generator.
Apply a locking agent to the three bolt threads.
Install the bolts and tighten it to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7.3 lbf·ft)
FLANGE BOLTS
GROMMET
GUIDE
ALTERNATOR
IGNITION
PULSE
GENERATOR
10-17