Brake Pad/Disc; Front Brake Pad Replacement - Honda CB HORNET 160R 2015 Shop Manual

BRAKE PAD/DISC

FRONT BRAKE PAD REPLACEMENT

(CBS AND DISC)
Always replace
Push the caliper pistons all the way in to facilitate installation
the brake pads
of new brake pads (giving some space).
in pairs to
NOTE:
assure even
Check the brake fluid level in the brake master cylinder
disc pressure.
reservoir as this operation causes the level to rise.
Remove the brake pad hanger pin by unscrewing it with
the help of wrench.
Check the pad pin for abnormal wear or distortion.
Replace if necessary.
Do not operate
Remove the brake pads.
the rear brake
Clean the brake caliper inside especially around the piston.
pedal or front
brake lever after Install new brake pads if found below specification.
the brake pads
are removed.
INSTALLATION
Make sure the pad spring is installed in position.
CBS DISC
CALIPER BODY
CBS DISC
PAD HANGER PIN
DISC
CBS
BRAKE PAD
DISC
CBS
BRACKET
PAD
SPRING
BRAKE
PADS
BRAKE SYSTEM
Align
14-7