Viewing The Vlacp Port Configuration - Avaya 8600 Configuration Manual

funcmac-addr
<0x00:0x00:0x00:0x00:0x00:0x00>
slow-periodic-time <10000-30000>
timeout {long|short}
timeout-scale <2-10>

Viewing the VLACP port configuration

View the VLACP port configuration to show the port VLACP configuration.
Prerequisites
• You must log on to the Privileged EXEC mode in the ACLI.
Procedure steps
1. View the VLACP port configuration for all interfaces by using the following command:
Configuration — Link Aggregation, MLT, and SMLT
Variable
Viewing the VLACP port configuration
Value
Sets the multicast MAC address used for the
VLACPDU. Specify a MAC address in the
format 0x00:0x00:0x00:0x00:0x00:0x00.
Sets the slow periodic time (in milliseconds)
for a specific port type.
The default value is 30000.
Sets the port to use the long or short timeout:
• sets the port to use the timeout-
long
scale value multiplied by the slow-periodic-
time.
• short sets the port to use the timeout-
scale value multiplied by the fast-periodic-
time.
For example, if you specify a short timeout,
set the timeout-scale value to 3, and the fast-
periodic-time to 400 ms, the timer will expire
within 1000 to 1200 ms.
To set this option to the default value (long),
use the operator with the
default
command.
Sets a timeout scale for this port used to
calculate the timeout. The default value is 3.
To set this option to the default value, use the
default operator with the command.
January 2012 147