Mlt And Smlt Show Commands Navigation; Viewing Information About Collision Errors - Avaya 8600 Configuration Manual

MLT and SMLT link aggregation configuration using the ACLI
Note:
If you disable and enable the SMLT or IST ports, the designated port information may not
appear correctly.

MLT and SMLT show commands navigation

•

Viewing information about collision errors

• Viewing information about Ethernet errors
• Viewing all ports configured for single port SMLT
Viewing information about collision errors
View information about collision errors to obtain information about collision errors in the
specified MLT, or for all MLTs.
Prerequisites
• You must log on to the Privileged EXEC mode in the ACLI.
Procedure steps
1. View information about collision errors by using the following command:
show mlt error collision [<mltid>]
Variable definitions
Use the data in the following table to help you use the show mlt error collision
command.
<mltid>
142 Configuration — Link Aggregation, MLT, and SMLT
Variable
Comments? infodev@avaya.com
on page 142
on page 143
on page 143
Value
Specifies the MLT ID. The value ranges from 1–
256.
January 2012