Editing An Ist - Avaya 8600 Configuration Manual

15. In the Device Physical View, select a port on the Ethernet module.
16. In the navigation tree, open the following folders: Configuration > Edit > Port.
17. Click General.
18. Click the CP Limit tab.
19. In the CpLimitEnable option for each port, select disable.
20. Click Apply.
Variable definitions
Use the data in the following table to help you configure the IST MLT dialog box.
Variable
PeerIp
VlanId
StpEnable
SessionEnable
SessionStatus

Editing an IST

Edit an IST to make changes to an IST MLT.
Procedure steps
1. In the navigation tree, open the following folders: Configuration > VLAN.
2. Double-click MLT/LACP.
3. Click the MultiLink/LACP Trunks tab.
4. Select the IST.
5. Click IstMlt.
6. In the PeerIp box, enter the peer IP address.
7. In the VlanId box, enter a VLAN ID.
Configuration — Link Aggregation, MLT, and SMLT
The IST is added to the MLT/LACP box.
An IST MLT peer IP address.
An IST VLAN ID number.
Enables and disables Stp functionality.
Enables and disables IST functionality.
The default value is disable.
Displays the status of the IST session.
Value
Editing an IST
January 2012 75