Avaya 8600 Configuration Manual page 64

Ethernet routing switch
Hide thumbs Also See for 8600:
Table of Contents

Advertisement

Link aggregation configuration using Enterprise Device Manager
PartnerAdminSystemPriority
PartnerOperSystemPriority
PartnerAdminSystemID
PartnerOperSystemID
PartnerAdminKey
PartnerOperKey
64
Configuration — Link Aggregation, MLT, and SMLT
Variable
Comments? infodev@avaya.com
Value
The current administrative value of the port
number for the protocol partner. This is a 16 bit
read-write value in the range of 0–65535. The
assigned value is used, along with the value of
PartnerAdminSystemPriority,
PartnerAdminSystemID, PartnerAdminKey,
and PartnerAdminPortPriority, to achieve
manually configured aggregation.
The default value is 0.
A two octet read-only value indicating the
operational value of priority associated with the
partner system ID. The value of this attribute
can contain the manually configured value
carried in PartnerAdminSystemPriority if there
is no protocol partner.
The default value is 0.
A six octet read-write MAC address value that
represents the administrative value of the
aggregation port protocol partners system ID.
The assigned value is used with the values of
PartnerAdminSystemPriority,
PartnerAdminKey, PartnerAdminPort, and
PartnerAdminPortPriority to achieve manually
configured aggregation.
The default value is 00:00:00:00:00:00.
A six octet read-only MAC address value that
indicates representing the current value of the
aggregation port's protocol partner system ID.
A value of zero indicates that there is no known
protocol partner. The value of this attribute can
contain the manually configured value carried
in PartnerAdminSystemID if there is no
protocol partner.
The default value is 00:00:00:00:00:00.
The current administrative value of the key for
the protocol partner. This is a 16–bit read-write
value in the range of 0–65535. The assigned
value is used with the value of
PartnerAdminSystemPriority,
PartnerAdminSystemID, PartnerAdminPort,
and PartnerAdminPortPriority to achieve
manually configured aggregation.
The default value is 0.
The current operational value of the key for the
aggregator current protocol partner. This is a
16-bit read-only value. If the aggregation is
January 2012

Advertisement

Table of Contents
loading

This manual is also suitable for:

8800

Table of Contents