1. Create VLAN 100 and add ports to the VLAN:
2. Configure LACP on S1 switch ports:
3. Create MLT 10 and configure LACP. Ensure the LACP key is the same as that
Configuring S2:
1. Create VLAN 100 and add ports to the VLAN:
2. Configure LACP on S2 switch ports:
3. Create MLT 10 and configure LACP. Ensure the LACP key is the same as that
Configuration — Link Aggregation, MLT, and SMLT
ERS-8606:5#config vlan 100 create byport 1
ERS-8606:5# config vlan 100 ports add 1/1-1/2,2/1-2/2
ERS-8606:5#config ether 1/1-1/2,2/1-2/2 lacp key 10
ERS-8606:5# config ether 1/1-1/2,2/1-2/2 lacp aggregation true
ERS-8606:5#config ether 1/1-1/2,2/1-2/2 lacp enable
configured in step 2:
ERS-8606:5#config mlt 10 create
ERS-8606:5#config mlt 10 lacp key 10
ERS-8606:5#config mlt 10 lacp enable
ERS-8606:5#config vlan 100 create byport 1
ERS-8606:5#onfig vlan 100 ports add 1/1-1/2,2/1-2/2
ERS-8606:5#config ether 1/1-1/2,2/1-2/2 lacp key 10
ERS-8606:5#config ether 1/1-1/2,2/1-2/2 lacp aggregation true
ERS-8606:5#config ether 1/1-1/2,2/1-2/2 lacp enable
configured in step 2:
ERS-8606:5#config mlt 10 create
ERS-8606:5#config mlt 10 lacp key 10
ERS-8606:5#config mlt 10 lacp enable
Multilink with LACP configuration example
January 2012
121