Avaya 8600 Configuration Manual page 128

Link aggregation configuration using the ACLI
mode {active, passive}
partner-key <0–65535>
partner-port <0–65535>
partner-port-priority <0–65535>
partner-state <0x00–0xff>
partner-system-id
<0x00:0x00:0x00:0x00:0x00:0x0
0>
partner-system-priority <0–
65535>
priority <0–65535>
slow-periodic-time
<10000-30000>
system-priority <0-65535>
timeout-scale <2-10>
timeout-time {long,short}
128 Configuration — Link Aggregation, MLT, and SMLT
Variable
Sets the LACP mode to be active or passive.
The default value is active.
Sets the partner administrative key.
The default value is 0.
Sets the partner administrative port value.
The default value is 0.
Sets the partner administrative port priority value.
The default value is 0.
Sets the partner administrative state bitmask. Specify
the partner administrative state bitmap in the range
0x0-0xff. The bit to state mapping is Exp, Def, Dis, Col,
Syn, Agg, Time, and Act.
For example, to set the two partner-state parameters
specify a value of 0x05 (bitmap = 00000101).
Sets the partner administrative system ID. Specify a
MAC address in the format
0x00:0x00:0x00:0x00:0x00:0x00.
Sets the partner administrative system priority value.
The default value is 0.
Sets the port priority. The default value is 32768. To set
this option to the default value, use the
operator with the command.
Sets the slow periodic time for this port. The default is
30000 ms. To set this option to the default value, use
the
Sets the system priority for this port.
The default value is 32768.
Sets a timeout scale for this port. The default value is
3. To set this option to the default value, use the
default
Sets the timeout to either long or short. To set this option
to the default value, use the
the command.
The default value is long.
Comments? infodev@avaya.com
• Act = true
• Agg = true
operator with the command.
default
operator with the command.
Value
default
default operator with
January 2012