Adding Ports To An Mlt Lag - Avaya 8600 Configuration Manual

MLT and SMLT link aggregation configuration using the CLI
delete
info
mcast-distribution
disable}
name <string>
ntstg {enable|disable}
perform-tagging

Adding ports to an MLT LAG

Add ports to an MLT LAG to add an existing VLAN to a link aggregation configuration.
Procedure steps
1. Adding ports to an MLT LAG by using the following command:
96 Configuration — Link Aggregation, MLT, and SMLT
Variable
{enable|
{enable|disable}
Comments? infodev@avaya.com
Value
port state disable
.
enable
•
multicast-limit
multicast control frame rate. The default
value is 10000.
•
broadcast-limit
broadcast frame rate. The default value is
10000.
Deletes a LAG.
Shows current settings for the specified
LAG.
Enables or disables multicast distribution per
LAG. Multicast distribution is disabled by
default.
For more information, see Avaya Ethernet
Routing Switch 8800/8600 Configuration —
IP Multicast Routing Protocols,
NN46205-501.
Names a LAG.
• string is the name, from 0 to 20
characters.
Enables or disables NTSTG.
The default value is enable.
Enables or disables tagging on a link
aggregation port.
The default value is disable.
, and then
<value> is the
<value> is the
January 2012