Deleting Atm Lec Switch Ports; Viewing Lec Port Operational Information - Avaya P550R User Manual

Deleting ATM LEC Switch Ports

Viewing LEC Port Operational Information

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
To delete an ATM LEC switch port:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 18).
2. Click the number in the Switch Ports column for the ATM
Uplink module you want to delete LEC switch ports from. The
Switch Ports dialog box opens (Figure 37).
3. Click Manage LEC Switch Ports. The ATM Switch LEC
Ports dialog box opens (Figure 38).
4. Select the ATM LEC Port in the ID column you want to
delete.
* Note: In order to change the LEC parameters, the
Administrative Status state must be Down.
5. Click Delete. The Delete ATM LEC Switch Ports dialog box
opens.
6. Click Yes to delete the ATM port or click No to retain the
port.
To view the LEC port operational information:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 18).
2. Click the number in the Switch Ports column for the ATM
Uplink module you want to view information for. The Switch
Ports dialog box opens (Figure 37).
3. Click Manage LEC Switch Ports. The ATM LEC Switch
Ports dialog box opens (Figure 38).
4. Click the name of the port in the Name column you want to
view. The LEC Port <#> Operational Information dialog box
opens (Figure 43). Table 44 describes the parameters.
* Note: The LEC must be enabled and operational in
order to view the information.
Configuring LANE
3-33