Chapter 12: Mlt And Smlt Link Aggregation Configuration Using The Acli; Job Aid: Roadmap Of Mlt And Smlt Commands - Avaya 8600 Configuration Manual

Chapter 12: MLT and SMLT link aggregation
Configure link aggregation to provide link level redundancy and increase load sharing. Multi-Link Trunking
(MLT) is a link aggregation technology that allows grouping several physical Ethernet links into one logical
Ethernet link to provide fault-tolerance and high-speed links between routers, switches, and servers. SMLT
is an option that improves Layer 2 (bridged) resiliency.

Job aid: Roadmap of MLT and SMLT commands

The following command lists the command and their parameters that you use to complete the
procedures in this section.
Privileged EXEC mode
show mlt
show mlt error
show mlt stats <mlt ID>
Global Configuration mode
mlt <mlt ID>
show smlt
Configuration — Link Aggregation, MLT, and SMLT
configuration using the ACLI
Command Parameter
collision [<1-256>]
main [<1-256>]
enable name <0-20>
encapsulation dot1q
member <portList>
name <0-20>
ntstg enable
vlan <vid>
<cr>
{fastethernet|gigabitethernet}
[<portList>]
January 2012 131