Viewing information about Ethernet errors
View information about Ethernet errors to display information about the types of Ethernet errors
sent and received by the specified MLT or all MLTs.
Important:
The IMAC columns refer to internal MAC address errors.
Prerequisites
• You must log on to the Privileged EXEC mode in the ACLI.
Procedure steps
1. View information about Ethernet errors by using the following command:
show mlt error main [<mltid>]
Variable definitions
Use the data in the following table to help you use the show mlt error main command.
<mltid>
Viewing all ports configured for single port SMLT
View all ports for a single port SMLT to ensure the correct ports are configured.
Prerequisites
• You must log on to the Privileged EXEC mode in the ACLI.
Procedure steps
1. View all ports configured for single port SMLT by using the following command:
Configuration — Link Aggregation, MLT, and SMLT
Variable
Specifies the MLT ID. The value ranges from 1–256.
MLT and SMLT show commands
Value
January 2012
143