Viewing Ipv6 Tcp Information; Unable To Establish A Ipv6 Udp Connection; Viewing The Global Ipv6 Configuration; Viewing Ipv6 Udp Information - Avaya Virtual Services Platform 7000 Series Troubleshooting Manual

Procedure
1. Log on to ACLI to enter User EXEC mode.
2. Use the show ipv6 address <switch | unit> command to display the IPv6 address
that is configured for the switch.
3. If required, correct the IPv6 address that the Telnet, HTTP, or SSH client used to attempt a
connection to the switch.

Viewing IPv6 TCP information

Use this procedure to view and analyze IPv6 TCP information.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. Use the show ipv6 tcp command to display IPv6 TCP statistics
3. Use the show ipv6 tcp connections command to display IPv6 TCP connections.
4. Use the show ipv6 tcp listener command to display IPv6 TCP listeners.
5. Observe and analyze the command output.

Unable to establish a IPv6 UDP connection

This section describes the troubleshooting process you can use to troubleshoot IPv6 User Datagram
Protocol (UDP) connectivity issues.

Viewing the global IPv6 configuration

Use this procedure to display and analyze the global IPv6 configuration.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. Use the show ipv6 global command to display the global IPv6 configuration.
3. Observe and analyze the command output.

Viewing IPv6 UDP information

Use this procedure to display and analyze IPv6 UDP configuration information.
July 2015
Comments on this document? infodev@avaya.com
Unable to establish a IPv6 UDP connection
Troubleshooting Avaya VSP 7000 Series
57