MLT and SMLT link aggregation configuration using the ACLI
Procedure steps
1. At the prompt, enter the following commands:
ist mlt <ID>
no ist spanning-tree
Note:
If you want to disable SMLT Interoperability for MSTP, ensure that you remove redundant
paths, for VLANs, to the existing IST path. To prevent the formation of a bridging loop and
network failure, do not break or remove an MSTP device chain until you disable SMLT
interoperability.
Displaying MLT IST information using ACLI
Use the following procedure to display MLT IST information.
Prerequisites
• Log on to the Privileged Exec mode
Procedure steps
1. At the prompt, enter the following command:
show mlt ist
Viewing the MLT port calculated by the MLT hash
algorithm
View the MLT port calculated by the MLT hash algorithm to obtain information about the MLT
port calculated by the distribution algorithm for R, RS, and 8800 modules.
140
Configuration — Link Aggregation, MLT, and SMLT
Comments? infodev@avaya.com
January 2012