Avaya 8600 Configuration Manual page 71

Important:
For Ethernet Routing Switch 8800/8600 modules, up to eight same-type ports can belong
to an MLT.
Prerequisites
• Create an MLT before creating an SMLT. You can create an SMLT by selecting the MLT type
as SMLT and then specifying an SMLT ID.
Procedure steps
1. In the navigation tree, open the following folders: Configuration > VLAN.
2. Click MLT/LACP.
3. Click the MultiLink/LACP Trunks tab.
4. Click Insert.
5. In the Id box do one of the following:
6. In the PortType box, select the port type as one of the following:
7. In the Name box, type a name to identify the MLT-based SMLT port.
8. In the PortMembers box, click [...].
9. Click the ports you want to include in the MLT-based SMLT.
10. Click Ok.
11. In the VlanIds box, click [...].
12. Select the VLAN IDs for the MLT-based SMLT port, and then click Ok.
13. In the MltType box, select splitMLT.
Configuration — Link Aggregation, MLT, and SMLT
• type an available MLT ID number
• use the default
• Access
• Trunk
The ports are added to the PortMembers box on the Insert MultiLink/LACP Trunks
tab.
The VLANs are added to the VlanIds box in the MLT, Insert Trunks box.
The SmltId box appears.
Adding an MLT-based SMLT
January 2012 71