Avaya 8600 Configuration Manual page 60

Link aggregation configuration using Enterprise Device Manager
ActorSystemPriority
ActorSystemID
AggregateOrIndividual
ActorAdminKey
ActorOperKey
PartnerSystemID
PartnerSystemPriority
PartnerOperKey
60 Configuration — Link Aggregation, MLT, and SMLT
Variable
The two octet read-write value indicating the priority value
associated with the actor's system ID.
The default value is 32768.
The six octet read-write MAC address value used as a
unique identifier for the system that contains this
aggregator.
From the perspective of the link aggregation mechanisms,
only a single combination of actor system ID and system
priority are considered. No distinction is made between the
values of these parameters for an aggregator and the ports
that are associated with it. The protocol is described in
terms of the operation of aggregation within a single
system. However, the managed objects provided for the
both the aggregator and the port allow management of
these parameters. The result permit a single piece of
equipment to be configured by management to contain
more than one system from the point of view of the
operation of link aggregation. This is useful in the
configuration of equipment that has limited aggregation
capability.
Indicates whether the aggregator represents an aggregate
(true) or an individual link (false).
The current administrative value of the key for the
aggregator. The administrative key value can differ from
the operational key value. This is a 16–bit read-write value.
This key needs to match the LAG key.
The default value is 0.
The current operational value of the key for the aggregator.
The administrative key value can differ from the operational
key value. This is a 16–bit read-only value. The meaning
of particular key values is of local significance.
The six octet read-only MAC address value consisting of
the unique identifier for the current protocol partner of this
aggregator. A value of zero indicates that there is no known
partner. If the aggregation is manually configured, the value
is assigned by the local system.
The two octet read-only value that indicates the priority
value associated with the partner system ID. If the
aggregation is manually configured, this system priority
value is a value assigned by the local System.
The current operational value of the key for the aggregator
current protocol partner. This is a 16 bit read-only value. If
the aggregation is manually configured, the value is
assigned by the local system.
Comments? infodev@avaya.com
Value
January 2012