VLACP configuration using Enterprise Device Manager
Variable definitions
Use the data in the following table to help you to configure VLACP flap detect and damping.
FlapDetect
FlapFrequency
FlapInterval
84
Configuration — Link Aggregation, MLT, and SMLT
Variable
Comments? infodev@avaya.com
Value
Enables VLACP flap detect and damping.
The default is disable.
Specifies the flap frequency. The value
ranges from 3–30.
The default is 3.
Specifies the flap interval, in seconds. The
value ranges from 10–600.
The default is 60.
January 2012