Avaya 8600 Configuration Manual page 90

Link aggregation configuration using the CLI
partner-port-priority <int>
partner-state <0x00–0xff>
partner-system-id <mac>
partner-system-priority <int>
port-priority <integer>
slow-periodic-time <milliseconds>
system-priority <integer>
timeout {long|short}
timeout-scale <integer>
90 Configuration — Link Aggregation, MLT, and SMLT
Variable
Comments? infodev@avaya.com
Value
The default value is 0.
Sets the port-partner administrative port priority
value. The integer value ranges from 0 to 65535.
The default value is 0.
Sets the partner administrative state bitmask.
Specify the partner administrative state bitmap in
the range 0x00–0xff. The bit to state mapping is
Exp, Def, Dis, Col, Syn, Agg, Time, and Act.
For example, to set the two partner-state
parameters
• Act = true
• Agg = true
•
Specifies a value of 0x05 (bitmap = 00000101).
Sets the partner administrative system ID.
• mac is the LACP partner administrative system ID
MAC address in the format:
0x00:0x00:0x00:0x00:0x00:0x00.
Sets the partner administrative system priority
value.
• int is the LACP partner administrative system
priority. The integer value ranges from 0 to
65535.
The default value is 0.
Sets the port priority. The default value is 32768.
• integer is the port priority value. The integer value
ranges from 0 to 65535.
Sets the slow periodic time (in milliseconds) for a
specific port type.
The default value is 30000.
Sets system priority for this port.
• integer is the system priority value. The integer
value ranges from 0 to 65535.
The default value is 32768.
Sets the timeout value to either long or short for this
port.
The default value is long.
Sets a timeout scale for this port. The default value
is 3, and the value ranges from 2 to 10.
January 2012