Process control system, basis library readme v9.0 sp1 online (26 pages)
Summary of Contents for Siemens SIMATIC PCS 7
Page 1
SIMATIC PCS 7 cabinet design Introduction Overview Basic cabinet ET 200M I/O unit System unit Siemens PLT 112 · 2002...
Page 2
• All installation, commissioning, servicing and repair work can be carried out from the front of the cabinet • Design of power supply assembly: either with Siemens circuit- breakers or with circuit-breakers with monitoring contact for connection to receptacles (from company ETA) •...
Page 3
Overview The Siemens standard cabinet 8MC is the preferred basic cabi- net. The Siemens standard cabinet 8MC is a sheet-steel cabinet with rear panel and front door which can be assembled individ- ually or also in rows with further cabinets of this type.
Page 4
SIMATIC PCS 7 cabinet design ET 200M I/O unit Overview Complete ET 200M I/O stations are available for the cabinet packaging system. The station includes the power supply, com- ponents for connection to the PROFIBUS-DP fieldbus (electrical or optical design), selection of modules for hot swapping, and wiring of load current connections.
Page 5
• Components for connection to the CS 275 or PROFIBUS-TM system bus, components for PROFIBUS-TM as electrical or op- tical design. SIMATIC PCS 7 cabinet design AS 488/TM system unit • DC 24 V or AC 120/230 V power supply: depending on the in-...