Versions Of The Control Unit Udk20 - Roland R1000 Series Manual

B0048191 / Rev. 1.5
2.2

Versions of the control unit UDK20

The control unit article key is coded as follows:
1. Control unit UDK20 for connection of one sensor
UDK20 xx
2. Control unit UDK20 for connection of up to two sensors,
all sensors are plug connected directly at the unit.
UDK20
Basing on the article key shown above the following versions are available:
• UDK20-xx-S:
• UDK20-xx-S-FP:
• UDK20-2PW-xx-S:
• UDK20-2PW-xx-S-FP: Unit as previous, but for front plate mounting
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series UDK20
with integrated fieldbus interface
- S -FP
-
B C D
- 2PW - xx
B C
Unit for connection of one sensor (max. 4 via SSB),
in industrial enclosure,
with data backup via Fieldbus or serial port
Unit as previous, but for front plate mounting
Unit for connection of max. two sensors,
in industrial enclosure,
with data backup via Fieldbus or serial port
Manual
A = Control unit
B = Type of fieldbus:
C = pluggable connections at control unit
D = Control unit in front panel enclosure
A = Control unit
B = Connection of up to 2 sensors
C = Type of fieldbus:
- S -FP
D E
D = pluggable connections at control unit
E = Control unit in front panel enclosure
Technical data
PR = Profibus-DP
CN = ControlNet
DN = DeviceNet (B-coded)
DNT = DeviceNet (A-coded)
IN = Interbus-S
CP = CanOpen (B-coded)
COP = CanOpen (A-coded)
PN = ProfiNet IO
CC = CC-Link
EN = EtherNet/IP
ET = EtherCAT
PR = Profibus-DP
CN = ControlNet
DN = DeviceNet (B-coded)
DNT = DeviceNet (A-coded)
IN = Interbus-S
CP = CanOpen (B-coded)
COP = CanOpen (A-coded)
PN = ProfiNet IO
CC = CC-Link
EN = EtherNet/IP
ET = EtherCAT
11