Versions Of The Control Unit Udk20 - Roland udk20 Manual

B0048991 / Rev. 1.3
2.2

Versions of the control unit UDK20

The control unit article key is coded as follows:
1. Control unit UDK20 for connection of one sensor
UDK20 x x
2. Control unit UDK20 for connection of up to four sensors,
all sensors are plug connected directly at the unit.
UDK20
Version B
Version C
Basing on the article key shown above the following versions are available:
For wall mounting
UDK20-B-R-S
UDK20-B-O-S
UDK20-C-O-S
Pos: 12 /Doppelblech/Geräte/UDK20 Bus/2 Technische Daten/Sensoren @ 1\mod_1306417693892_501.doc @ 9276 @ 2 @ 1
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series UDK20
- - - S -FP
B C D E
- 2PW - x x - - S - FP
B C
Memory for 255 parameter sets (Nominal thickness and upper and lower limits).
Set up and addressing by push buttons
or via 9 resp. 11 opto coupled data inputs 24 VDC with joint common.
Same as Version B but in addition:
1 opto coupled RS232 interface for bi-directional data communication with a PLC or PC.
Variants of the UDK20 control unit (examples)
With one sensor
For front panel mounting
UDK20-B-R-S-FP
UDK20-B-O-S-FP
UDK20-C-O-S-FP
Manual
A = Control unit
B = Version
C = Outputs
D = Connectors on the unit pluggable
E = Control unit in front panel enclosure
A = Control unit
B = Connection of up to 2 sensors
C = Version
D = Outputs
D E F
E = Connectors on the unit pluggable
F = Control unit in front panel enclosure
For wall mounting
UDK20-2PW-B-R-S
UDK20-2PW-B-O-S
UDK20-2PW-C-O-S
Technical data
B
C
O: Opto coupler
R: Relay
B
C
O: Opto coupler
R: Relay
With up to two sensors
For front panel mounting
UDK20-2PW-B-R-S-FP
UDK20-2PW-B-O-S-FP
UDK20-2PW-C-O-S-FP
13