Programming With Fpwin Gr; Rtd Types Pt100, Pt1000, Ni1000 - Panasonic FP0 RTD Unit Technical Manual

FP0 RTD Unit

5.3 Programming with FPWIN GR

5.3.1 RTD Types Pt100, Pt1000, Ni1000

Ladder program to read data from input channels
This program shows you how to store temperature data for CH0 to CH5 of the FP0 RTD unit
installed as expansion unit no.1 in data registers DT0 to DT5.
The data for
CH0 and CH1
to be read
The data for
CH2 and CH3
to be read
The data for
CH4 and CH5
to be read
For further information, see page 13, I/O Allocation and Sample Programs.
I/O Allocation and Sample Programs
CH0 data → DT0
When CH1 data is positive → DT1
When CH1 data is negative → DT1
CH2 data → DT2
When CH3 data is positive → DT3
When CH3 data is negative → DT3
CH4 data → DT4
When CH5 data is positive → DT5
When CH5 data is negative → DT5
17