11 System Software Upgrade; General Upgrade - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5

11 System Software Upgrade

11.1
!
!
A50010-Y3-C150-2-7619
For the system enhancement and stability, new system software may be released. Using
this software, the hiD 6615 S223/323 can be upgraded without any hardware change.
You can simply upgrade your system software with the provided upgrade functionality via
the CLI.

General Upgrade

The hiD 6615 S223/323 supports the dual system software functionality, which you can
select applicable system software stored in the system according to various reasons such
as the system compatibility or stability.
To upgrade the system software of the switch, use the following command.
Command
copy { ftp | tftp } os download
{ os1 | os2 }
copy { ftp | tftp } os upload { os1 |
os2 }
To upgrade the system software, FTP or TFTP server must be set up first. Using the copy
command, the system will download the new system software from the server.
To reflect the downloaded system software, the system must restart using the reload
command. For more information, see Section 4.1.8.
The following is an example of upgrading the system software stored in os1.
SWITCH# copy ftp os download os1
To exit : press Ctrl+D
--------------------------------------
IP address or name of remote host (FTP): 10.100.158.144
Download File Name : V5212G.3.18.x
User Name : admin
Password:
Hash mark printing on (1024 bytes/hash mark).
Downloading NOS ....
##############################################################################
##############################################################################
##############################################################################
##############################################################################
##############################################################################
##############################################################################
(Omitted)
##############################################################################
##############################################################################
##############################################################################
##############################################################################
Mode
Downloads the system software of the switch via FTP
or TFTP.
os1 | os2: the area where the system software is stored
Enable
Uploads the system software of the switch via FTP or
TFTP.
UMN:CLI
Description
373