Transmitting Icmp Redirect Message - Siemens S223 User Manual

UMN:CLI
i
7.14.3
172
To configure the limited ICMP transmission time, use the following command.
Command
ip icmp interval rate-limit IN-
TERVAL
The default ICMP interval is 1 second (100 ms).
To return to default ICMP configuration, use the following command.
Command
ip icmp interval default
To display ICMP interval configuration, use the following command.
Command
show ip icmp interval

Transmitting ICMP Redirect Message

User can configure to transmit ICMP Redirect Message. Transmitting ICMP Redirect
Message is one of the ways preventing DoS(Denial of Service), and this can make the
switch provide the constant service to the hosts.SURPASS hiD 6615 transmits more op-
timized route to the host than the present route between the host connected to the switch
and the specific destination.
To activate the function transmitting ICMP Redirect Message, use the following command.
Command
ip redirects
no ip redirecs
SURPASS hiD 6615 S223/S323 R1.5
Mode
Configures a limited ICMP transmission time.
Global
INTERVAL: 0-2000000000 (unit: 10 ms)
Mode
Global Returns to default configuration.
Mode
Enable
Shows ICMP interval configuration.
Global
Mode
Activates the function transmitting ICMP Redirect
Message
Global
Deactivates the function transmitting ICMP Redi-
rect Message.
User Manual
Description
Description
Description
Description
A50010-Y3-C150-2-7619