System Agent (Sa) Configuration; Graphics Configuration - Siemens SIMATIC IPC427E Operating Instructions Manual

2.4.4

"System Agent (SA) Configuration"

2.4.4.1

"Graphics Configuration"

Calling "Graphics Configuration"
Select: "Setup Utility (Page 9)" > "Advanced" > "System Agent (SA) Configuration" > "Graphics
Configuration".
Firmware setting Value
Primary Display Auto
IGFX
PCI
Primary IGFX Boot VBIOS Default
Display
Internal Display
DPP (0x71)
DPP (0x70)
Firmware/BIOS Description SIMATIC IPC427E, IPC477E
Operating Instructions, 07/2020, A5E50262994-AA
Setting in Meaning
delivery
state
IPC427E
IPC477E
x During the boot procedure, the system automatically detects
whether the device has a graphics card. Messages during the boot
procedure are then issued via the graphics card. If no graphics
card is available, messages are generated during the boot process
via the integrated onboard graphics interface (Internal Graphics
Device = IGFX).
Messages are output exclusively via the integrated onboard
graphics interface (Internal Graphics Device = IGFX) during the
boot process.
During the boot procedure, the system automatically detects
whether the device has a PCIe graphics card. Messages during the
boot procedure are then issued via the PEG graphics card.
If no PCIe graphics card is available, messages are generated dur-
ing the boot process via the integrated onboard graphics interface
(Internal Graphics Device = IGFX).
x Information about the integrated onboard graphics interface
(Internal Graphics Device = IGFX) is provided by the "Display Port"
like the value defined for VBIOS.
Information about the integrated onboard graphics interface
(Internal Graphics Device = IGFX) is provided by the internal dis-
play. (only available on IPC477E)
Information about the integrated onboard graphics interface
(Internal Graphics Device = IGFX) is provided by the "Display Port"
DPP (0x71).
Information about the integrated onboard graphics interface
(Internal Graphics Device = IGFX) is provided by the "Display Port"
DPP (0x70).
Configure firmware
2.4 "Advanced" tab
15