Useful Tips; Listing Available Commands - Siemens S223 User Manual

UMN:CLI
3.2
3.2.1
i
36

Useful Tips

This section provides useful functions for user's convenience while using CLI commands.
They are as follow.

Listing Available Commands

•
Calling Command History
•
Using Abbreviation
•
Using Command of Privileged EXEC Enable Mode
•
Exit Current Command Mode
•
Listing Available Commands
To list available commands, input question mark <?>. When you input the question mark
<?> in each command mode, you can see available commands used in this mode and
variables following after the commands.
The following is the available commands on Privileged EXEC Enable mode of the hiD
6615 S223/S323.
SWITCH# ?
Exec commands:
clear Reset functions
clock Manually set the system clock
configure Enter configuration mode
copy Copy from one file to another
debug Debugging functions (see also 'undebug')
disconnect Disconnect user connection
enable Turn on privileged mode command
erase Erase saved configuration
exit End current mode and down to previous mode
halt Halt process
help Description of the interactive help system
no Negate a command or set its defaults
ping Send echo messages
quote Execute external command
rcommand Management stacking node
release Release the acquired address of the interface
reload Reload the system
renew Re-acquire an address for the interface
restore Restore configurations
show Show running system information
ssh Configure secure shell
tech-support Technical Supporting Function for Diagnosis System
(ommitted)
SWITCH#
Question mark <?> will not be seen in the screen and you do not need to press
<ENTER> key to display commands list.
If you need to find out the list of available commands of the current mode in detail, use
the following command.
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619
User Manual