Using Abbreviation; Using Command Of Privileged Exec Enable Mode; Tab. 3.13 Command Abbreviation - Siemens S223 User Manual

UMN:CLI
3.2.3
3.2.4
38
After using these commands in order: show clock → configure terminal → interface 1
→ exit, press the arrow key <↑> and then you will see the commands from latest one:
exit → interface 1 → configure terminal → show clock.
SWITCHconfig)# exit
SWITCH# show clock
Mon, 5 Jan 1970 23:50:12 GMT+0000
SWITCH# configure terminal
SWITCH(config)# interface 1
SWITCH(config-if)# exit
SWITCH(config)# exit
SWITCH# (press the arow key ↑)
↓
SWITCH# exit (arrow key ↑)
↓
SWITCH# interface 1 (arrow key ↑)
↓
SWITCH# configure terminal (arrow key ↑)
↓
SWITCH# show clock (arrow key ↑)
The hiD 6615 S223/S323 also provides the command that shows the commands used
before up to 100 lines.
Command
show history

Using Abbreviation

Most of the commands can be used also with abbreviated form. The following table
shows some examples of abbreviated commands.
Command
clock
exit
show
configure terminal
Command Abbreviation
Tab. 3.13

Using Command of Privileged EXEC Enable Mode

You can execute the commands of Privileged EXEC Enable mode as show, ping, telnet,
traceroute, and so on regardless of which mode you are located on.
To execute the commands of Privileged EXEC Enable mode on another mode, use the
following command.
Command
do COMMAND
SURPASS hiD 6615 S223/S323 R1.5
Mode
Enable Shows a command history.
Abbreviation
cl
ex
sh
con te
Mode
All Executes the commands of Privileged EXEC mode.
User Manual
Description
Description
A50010-Y3-C150-2-7619