Opaque-Lsa Support; Default Route - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
10.2.9
10.2.10
A50010-Y3-C150-2-7619
To release the configuration, use the following command.
Command
no ospf restart grace-period <1-1800>
ospf restart helper never
no ospf restart helper max-grace-period <1-
1800>

Opaque-LSA Support

Opaque-LSA is LSA Type-9, Type-10, Type-11. The hiD 6615 S323 enables Opaque-LSA
as a default but it can be released by user.
To release the enabled Opaque-LSA management, use the following command.
Command
no capability opaque
To enable Opaque-LSA management, use the following command.
Command
capability opaque

Default Route

You can configure ASBR (Autonomous System Boundary Router) to transmit default
route to OSPF network. Autonomous System Boundary router transmits route created ex-
ternally to OSPF network. However, it does not create system default route.
To have autonomous System Boundary router create system default route, use the follow-
ing command.
Command
default-information originate
The following items are detail options for the Default Route configuration.
•
metric
Configures Metric value of the default route.
•
metric-type
metric-type is for type of finding the path. metric-type 1 uses internal path cost with
external path cost as a cost, metric type 2 always uses external cost value only.
•
always
Transmits the default route to outside.
•
no-summary
Restricts to exchange routing information between OSPF area in NSSA.
Mode
Global
Mode
Router Releases the enabled Opaque-LSA management.
Mode
Router Enables Opaque-LSA management.
Mode
Router Configures the default route.
Description
Releases the configuration.
Description
Description
Description
UMN:CLI
351