Displaying System Image; Displaying Installed Os; Default Os - Siemens S223 User Manual

UMN:CLI
6.3.13
6.3.14
6.3.15
102
The following is an example of displaying information of the running processes.
SWITCH# show process
USER PID %CPU %MEM
admin 1 0.2
admin 2 0.0
admin 3 0.0
admin 4 0.0
admin 5 0.0
admin 6 0.0
admin 7 0.0
admin 8 0.0
admin 9 1.4
admin 10 1.4
admin 17 0.0
admin 149 0.0
admin 151 0.0
admin 103 2.6
--more--
(Omitted)
SWITCH#

Displaying System Image

To check a current system image version, use the following command.
Command
show version
To display a size of the current system image, use the following command.
Command
show os-size

Displaying Installed OS

To display utilization of flash memory, use the followng command.
Command
show flash

Default OS

The hiD 6615 S223/S323 supports dual OS You can show the flash memory by using
show system command. When there are two kinds of system images installed, user can
VSZ RSS TTY
0.2 1448 596 ?
0.0 0 0 ?
0.0 0 0 ?
0.0 0 0 ?
0.0 0 0 ?
0.0 0 0 ?
0.0 0 0 ?
0.0 0 0 ?
0.0 0 0 ?
0.0 0 0 ?
0.0 0 0 ?
0.3 1784 776 ?
0.2 1428 544 ?
2.0 20552 5100 ?
Mode
Enable
Shows version of system image.
Global
Mode
Enable
Shows size of system image.
Global
Mode
Enable
Shows utilization of flash memory.
Global
SURPASS hiD 6615 S223/S323 R1.5
STAT START TIME COMMAND
S 20:12 0:05 init [3]
S 20:12 0:00 [keventd]
SN 20:12 0:00 [ksoftirqd_CPU0]
S 20:12 0:00 [kswapd]
S 20:12 0:00 [bdflush]
S 20:12 0:00 [kupdated]
S 20:12 0:00 [mtdblockd]
SW< 20:12 0:00 [bcmDPC]
SW< 20:12 0:29 [bcmCNTR.0]
SW< 20:12 0:29 [bcmCNTR.1]
SWN 20:12 0:00 [jffs2_gcd_mtd3]
S Jan01 0:00 /sbin/syslogd –m
S Jan01 0:00 /sbin/klogd -c 1
S 20:12 0:53 /usr/sbin/swchd
Description
Description
Description
A50010-Y3-C150-2-7619
User Manual