Configuring Vrrp; Associated Ip Address - Siemens S223 User Manual

UMN:CLI
8.4.1
8.4.1.1
228

Configuring VRRP

To configure the hiD 6615 S323 as device in Virtual Router, use the following command
on Global Configuration mode. Then you can configure VRRP by opening VRRP Configu-
ration mode.
Command
router vrrp INTERFACE GROUP-
ID
To display a configuration of VRRP, use the following command.
Command
show vrrp
show vrrp INTERFACE
To delete the VRRP configuration, use the following command.
Command
no router vrrp <1-255>

Associated IP Address

After configuring a virtual router, you need to assign an associated IP address to the vir-
tual router. Assign unified IP address to routers in one group.
To assign an associate IP address to routers to a virtual router or delete a configured as-
sociate IP address, use the following command.
Command
associate A.B.C.D
no associate [A.B.C.D]
SURPASS hiD 6615 S223/S323 R1.5
Mode
Configures Virtual Router (VRRP Group).
Global
GROUP-ID: 1-255
Mode
Enable Shows current configuration of VRRP.
Global
Shows current configuration of specified interface
Bridge
VRRP.
VRRP
Mode
Configures Virtual Router (VRRP Group).
Global
1-255: group ID
Mode
Assigns an associated IP address to a virtual router.
VRRP
Deletes an assigned associated IP address from a
virtual router.
User Manual
Description
Description
Description
Description
A50010-Y3-C150-2-7619