UMN:CLI
7.3.4
i
7.3.5
124
In hiD 6615 S223/S323, the administrator can enable and disable basic TLV by selecting
it. To enable basic TLV by selecting it, use the following command.
Command
lldp enable PORTS { portdescrip-
tion | sysname | sysdescription |
syscap }
lldp
disable
PORTS
scription | sysname | sysde-
scription | syscap }
LLDP Message
In hiD 6615 S223/S323, it is possible to configure the interval time and times of sending
LLDP message. To configure the interval time and times of LLDP message, use the fol-
lowing command.
Command
lldp msg txinterval <5-32768>
lldp msg txhold <2-10>
Default for sending LLDP message is 4 times in every 30 seconds.
Interval and Delay Time
In hiD 6615 S223/S323, the administrator can configure the interval time of enabling
LLDP frame after configuring LLDP operation type. To configure the interval time of ena-
bling LLDP frame after configuring LLDP operation type, use the following command.
Command
lldp reinitdelay <1-10>
To configure delay time of transmitting LLDP frame, use the following command.
Command
lldp txdelay <1-8192>
Mode
Selects basic TLV that is sent in the port.
portdescription: Port's description
syscap: System's capablility
sysname: System's name
Bridge
sysdescription: System's description
{ portde-
Disables basic TLV configured as sent in the port.
Mode
Configures the interval of sending LLDP message. The
unit is second.
Bridge
Configures the periodic times of LLDP message.
Mode
Configures the interval time of enabling LLDP frame
Bridge
from the time of configuring not to process LLDP
frame. (default: 2)
Mode
Configures delay time of transmitting LLDP frame.
Bridge
(default: 2)
SURPASS hiD 6615 S223/S323 R1.5
Description
Description
Description
Description
A50010-Y3-C150-2-7619
User Manual